TM-5-5420-228-24

LAUNCHER HYDRAULICS SYSTEM M48A5/M60A1 TANK CHASSIS, TRANSPORTING: FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL, DIRECT SUPPORT AND GENERAL SUPPORT; MAINTENANCE MANUAL

AUGUST 1985

TM-5-5420-228-24 - Page 558 of 750

TM 5-5420-228-24

HOLD-DOWN CYLINDER ARMOR REPLACEMENT (Sheet 1 of 1)

TOOLS:

3/4 in. combination box and open end wrench

3/4 in. socket with 1/2 in. drive

5 in. extension with 1/2 in. drive

Ratchet with 1/2 in. drive

SUPPLIES:

Lockwashers (3 required)

REFERENCE:

TM 5-5420-202-10

REMOVAL:

1.

Using socket on screw (A) and wrench on nut

(B), remove three screws (A), nuts (B), and

lockwashers (C).

2.

Pull armor (D) forward, then up, and remove from

vehicle.

INSTALLATION:

1.

Position armor (D) on vehicle and slide it

rearward to aline holes.

2.

Insert three screws (A).

3.

place

lockwashers (C) and start nuts

(B) on three screws (A).

4.

Using socket on three screws (A) and wrench on nuts (B), tighten screws (A).

End of Task

TA251643

3-253