TM-5-5420-228-24

LAUNCHER HYDRAULICS SYSTEM M48A5/M60A1 TANK CHASSIS, TRANSPORTING: FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL, DIRECT SUPPORT AND GENERAL SUPPORT; MAINTENANCE MANUAL

AUGUST 1985

TM-5-5420-228-24 - Page 565 of 750

TM 5-5420-228-24

HEU AND EARLY MODEL HOLD-DOWN CYLINDER REPAIR (Sheet 4 of 4)

8.

Install bushing (K) on piston rod (B).

9.

Using spanner wrench in unthreaded holes (L), tighten bushing (K).

10.

Install new wiper ring (M) on piston rod (B).

11.

Install retainer plate (N) on piston rod (B) and aline holes with threaded holes in bushing (K).

12.

Using cross-tip screwdriver, install four screws (P).

13.

Remove tape from threads of piston rod (B).

14.

Install hold-down cylinder (page 3-255).

End of Task

3-256.4

Change 3