TM-5-5420-228-24

LAUNCHER HYDRAULICS SYSTEM M48A5/M60A1 TANK CHASSIS, TRANSPORTING: FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL, DIRECT SUPPORT AND GENERAL SUPPORT; MAINTENANCE MANUAL

AUGUST 1985

TM-5-5420-228-24 - Page 592 of 750

TM 5-5420-228-24

RESERVOIR QUADRANT BLOWER ASSEMBLY REPAIR (Sheet 2 of 2)

NOTE

Do steps 1 and 2 only if plate

(A) was removed.

ASSEMBLY:

1.

Place identification plate (A) on shroud (B).

2.

Using hammer, install four new drive screws (C).

3.

Place motor (D) in shroud (B).

4.

Using 7/16 inch socket and extension, install four screws (E) and lockwashers (F).

5.

Place key (G) in position.

6.

Place impeller (H) in position.

7.

Manually holding impeller (H) stationary, use 3/4 inch socket and extension to install

nut (J).

8.

Install blower assembly in vehicle (page 3-4).

End of Task

TA251655

4-3