TM-5-5420-228-24

LAUNCHER HYDRAULICS SYSTEM M48A5/M60A1 TANK CHASSIS, TRANSPORTING: FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL, DIRECT SUPPORT AND GENERAL SUPPORT; MAINTENANCE MANUAL

AUGUST 1985

TM-5-5420-228-24 - Page 588 of 750

TM 5-5420-228-24

DRIVER’S HATCH NIGHT VIEWER LATCH REPAIR (Sheet 10 of 10)

29. Position assembled parts as shown with rod (T)

over threaded portion of shaft (F).

30.

Place flat washer (Z), lockwasher (AA), and

nut (AB) on shaft (F).

31. Using 7/16 inch wrench, tighten nut (AB).

32. Hold night viewer latch firmly on a flat surface.

Release lever (K) and turn handle (M) forward

1/2 turn to locked position. Release and return

to position shown.

NOTE

Handle should lock in both

forward and rear positions and

plunger (W) should not bind during

movement.

33. Install night viewer latch (page 3-267).

End of Task

TA251776

3-279/(3-280 blank)