TM-5-5420-228-24

LAUNCHER HYDRAULICS SYSTEM M48A5/M60A1 TANK CHASSIS, TRANSPORTING: FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL, DIRECT SUPPORT AND GENERAL SUPPORT; MAINTENANCE MANUAL

AUGUST 1985

TM-5-5420-228-24 - Page 586 of 750

TM 5-5420-228-24

DRIVER’S HATCH NIGHT VIEWER LATCH REPAIR (Sheet 8 of 10)

17.

18.

19.

20.

With one person relieving load with punch,

remove drill bit and handle (M).

Place spacer (Q) and handle (M) on shaft (F).

Using hammer, drive pin (R) into retaining hole

of handle (M) and shaft (F).

Remove punch

21. Release lever (K) and Push handle (M) forward

1/2 turn to locked

to position shown.

position. Release and return

NOTE

Handle should lock in both forward

should not bind during movement.

22. Remove assembled parts from vise.

Go on to Sheet 9

and aft positions and

TA251774

3-277