TM-9-1200-215-34-P
AUTOMATIC FIRE CONTROL SYSTEM (AFCS)
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL
FEBRUARY 1999
TM-9-1200-215-34-P - Page 168 of 266
TM 9–1200–215–34&P
6–14
6–15.
HANDLE MAINTENANCE INSTRUCTIONS
DESCRIPTION
This task covers:
a.
Removal
b.
Installation
INITIAL SETUP
Tools:
Tool Kit, JTK–17LAL, TK–101/G, or TK–105/G
(items 34, 35, & 36, Appendix E)
Torque Wrench, 0–75 in–lb (item 40, Appendix E)
Work Station Kit, Electronic (item 38, Appendix E)
#2 Crosstip Screwdriver Socketwrench
(item 22, Appendix E)
Equipment Condition:
Unenergized PCU is on workbench
Personnel Required:
Two MOS 35Y
a.
REMOVAL
1.
Remove four screws (1) at each mounting
point (2) of handle (3).
2.
Remove handle (3) from PCU (4).
b.
INSTALLATION
1.
Install handle (3) to PCU housing and secure
with four screws (1) at each mounting point
(2).
2.
Torque eight screws (2) to 30+.5 in.–lb
(15.8+0.1 N
S
m).
2
3
4
1
Back to Top
