TM-9-1240-382-34P
M35E1 PERISCOPE, TANK
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE REPAIR PARTS AND SPECIAL TOOLS LIST (INCLUDING DEPOT MAINTENANCE REPAIR PARTS)
TM-9-1240-382-34P - Page 5 of 77
TM 9-1240-382-34P
SECTION I.
INTRODUCTION
1.
Scope
This manual lists spares and repair parts; special tools;
special test, measurement, and diagnostic equipment
(TMDE); and other special support equipment required
for the performance of direct support and general
support maintenance of the Tank Periscope, M35E1. It
authorizes the requisitioning and issue of spares and
repair parts as indicated by the source and maintenance
codes.
2. General
This Repair Parts and Special Tools List is divided into
the following sections:
a. Section II. Repair Parts List
.
A list of spares and
repair parts authorized for use in the performance of
maintenance. The list also includes parts which must be
removed for replacement of the authorized parts. Parts
lists are composed of functional groups in numeric
sequence, with the parts in each group listed in figure
and item number sequence. Bulk materials are listed in
National stock number (NSN) sequence.
b. Section III. Special
Tools List.
A list of special
tools, special TMDE, and other special support
equipment
authorized
for
the
performance
of
maintenance.
c. Section IV. National Stock Number and Part
Number Index.
A list in National item identification
number (NIIN, the last nine figures of the NSN)
sequence, of all National stock numbers (NSNs)
appearing in the listings, followed by a list in
alphanumeric sequence of all part numbers appearing in
the listings. National stock numbers and part numbers
are cross-referenced to each illustration figure and item
number appearance.
3.
Explanation of Columns
a. Illustration
.
This column is divided as follows:
(1)
Figure numbers
.
Indicates the figure number
of the illustration on which the item is shown.
(2)
Item number.
The number used to identify
item called out in the illustration.
b. Source, Maintenance, and Recoverability (SMR
)
Codes.
(1) S
ource code.
Source codes indicate the
manner of acquiring support items for maintenance,
repair, or overhaul of end items. Source codes are
entered in the first and second positions of the Uniform
SMR Code format as follows:
Code
Definition
PA .
..............
Item procured and stocked for anticipated
or known usage.
PB .
.............
Item procured and stocked for insurance
purposes because essentially dictates that
a minimum quantity be available in the
supply system.
PC .
..............
Item procured and stocked and which
otherwise would be coded PA except that it
is deteriorate in nature.
PD .
..............
Support
item,
excluding
support
equipment, procured for initial issue or
outfitting and stocked only for subsequent
or additional initial issues or outfitting. Not
subject to automatic replenishment.
PE .
.............
Support equipment procured and stocked
for initial issue or outfitting to specified
maintenance repair activities.
PF .
..............
Support equipment which will not be
stocked but which will be centrally procured
on demand.
PG.
..............
Item procured and stocked to provide for
sustained support for the life of the
equipment. It is applied to an item peculiar
to the equipment which, because of
probable discontinuance or shutdown of
production
facilities,
would
prove
uneconomical to reproduce at a later time.
KD .
..............
An item of a depot overhaul/repair kit and
not purchased separately. Depot kit defined
as a kit that provides items required at the
time of overhaul or repair.
KF.
...............
An item of a maintenance kit and not
purchased separately. Maintenance kit
defined as a kit that provides an item that
can be replaced at organizational or
intermediate levels of maintenance.
KB .
..............
Item included in both a depot over-
haul/repair kit and a maintenance kit.
1
Back to Top
