TM-9-1240-382-34P
M35E1 PERISCOPE, TANK
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE REPAIR PARTS AND SPECIAL TOOLS LIST (INCLUDING DEPOT MAINTENANCE REPAIR PARTS)
TM-9-1240-382-34P - Page 7 of 77
Recoverability
Code
Definition
Z.....................
Nonrepairable item.
When unserviceable,
condemn and dispose at the level indicated in
position 3.
0.....................
Reparable
item.
When
uneconomically
reparable,
condemn
and
dispose
at
organizational level.
F.....................
Reparable item.
When uneconomically
reparable, condemn and dispose at the direct
support level.
HE.
.................
Reparable
item.
When
uneconomically
reparable, condemn and dispose at the general
support level.
D ....................
Reparable item.
When beyond lower level
repair capability, return to depot. Condemnation
and disposal not authorized below depot level.
L.....................
Reparable item.
Repair, condemnation, and
disposal not authorized below depot/specialized
repair activity level.
A ....................
Item requires special handling or condemnation
procedures because of specific reasons (i.e.,
precious metal content, high dollar value, critical
material, or hazardous material). Refer to
appropriate manuals/directives for specific
instructions.
c. National Stock Number.
Indicates the National stock
number assigned to the item and which will be used for
requisitioning purposes.
d.
Part Number.
Indicates the primary number used by
the manufacturer (individual, company, firm, corporation, or
Government activity), which controls the design and
characteristics of the item by means of its engineering
drawings,
specifications,
standards,
and
inspection
requirements to identify an item or range of items.
NOTE
When a stock numbered item is
requisitioned, the item received may have a
different part number than the part being
replaced.
e. Federal Supply Code for Manufacturer (FSCM).
The
FSCM is a five-digit numeric code listed in SB 708-42 which is
used to identify the manufacturer, distributor, or Government
agency,
etc.
f.
Description.
Indicates the Federal item name and, if
required, a minimum description to identify the item. Items that
are included in kits and sets are listed below the name of the
kit or set with the quantity of each item in the kit or set
indicated in the quantity incorporated in unit column. When the
part to be used differs between serial numbers of the same
model, the effective serial numbers are shown as the last line
of the description. In the special tools list, the initial basis of
issue (OI!) appears as the last line in the entry for each special
tool, special TMDE, and other special support equipment.
When the density of equipments supported exceeds density
spread indicated in the basis of issue, the total authorization is
increased accordingly.
g.
Unit of Measure
(U/M).
Indicates the standard of the
basic quantity of the listed item as used in performing the
actual maintenance function. This measure is expressed by a
two-character alphabetical abbreviation (e.g., ea., in., pr, etc).
When the unit of measure differs from the unit of issue, the
lowest unit of issue that will satisfy the required units of
measure will be requisitioned.
h.
Quantity Incorporated in Unit.
Indicates the quantity
of the item used in the breakout shown on the illustration
figure, which is prepared for a functional group, subfunctional
group, or an assembly. A "V" appearing in this column in lieu
of a quantity indicates that no specific quantity is applicable
(e.g., shims, spacers, etc.).
4. Special Information
a.
Detailed manufacturing instructions for items source
coded to be manufactured or fabricated are found in TM 9-
i240-382-3h series.
Bulk materials required to manufacture
items are listed in the Bulk Material Group of this manual.
b. The following publications pertain to Tank
Periscope, M35E1 and its components:
Publication and Short Title
TM 9-2350-253-10, Operator’s Manual:
Tank, Combat, Full-
Tracked:
105-MrM Gun, M60A3 Turret
TM 9-2350-253-20-2, Organizational Maintenance Manual:
Tank, Combat, Full-Tracked:
105-NM Gun, M60A3 Turret
TM 9-2350-253-20P-2, Organizational Maintenance Repair
Parts and Special Tools List for Turret of Tank, Combat,
Full-Tracked:
105-MM4 Gun, M60A3 Turret
TM 9-1240-382-34, Direct Support and Central Support
Maintenance Manual for M35E! Periscope, Tank
3
Back to Top
