TM-9-1290-365-24-P

PALADIN MUZZLE VELOCITY SYSTEM M93 UPGRADED

TECHNICAL MANUAL; UNIT, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST

OCTOBER 2000

TM-9-1290-365-24-P - Page 278 of 334

ARMY TM 9-1290-365-24&P

D.8.7 Visual Inspection.

Refer to Figures D-38. and D-39.

a. Inspect connectors for damaged pins and foreign matter.

b. Inspect all components for secure attachment.

c. Inspect all parts for damage, wear, and deterioration.

d. Inspect all parts for nicks, scoring, dents, scratches, and broken runs.

e. Inspect all electronic components for indication of overheating, cracked bodies, loose terminals,

broken leads, cold solder joints, and other indications of damage or deterioration.

f.

Inspect all wiring for bent or broken leads, cracked, frayed, deteriorated, worn, overheated or burnt

insulation, and security of attachment. Check lacing for secure attachment.

D.8.8 Repair.

The EMI filter module is a nonrepairable item. No repair is authorized. When unservice-

able, condemn and dispose of the item.

D.8.9 Painting.

No painting required on EMI filter module.

D.8.10 EMI Filter Module Installation.

Install EMI Filter Module lAW para. D.4.11.1.

D.8.11 Testing.

D.8.11.1 GENERAL.

a. The EMI filter module testing is a continuity check.

b. The test data sheet in Table D-23. are to be reproduced locally, as required, for recording the test

results. The test data sheets must be completed each time a test section is performed. The

completed test data sheets shall be retained.

D108