TM-9-1290-365-24-P
PALADIN MUZZLE VELOCITY SYSTEM M93 UPGRADED
TECHNICAL MANUAL; UNIT, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST
OCTOBER 2000
TM-9-1290-365-24-P - Page 52 of 334
ARMY TM 9-1290-365-24&P
3.1.2 Materials Required
. Repair materials and other consumable item required for general
maintenance of the MVS are listed in Table 3-2.
Table 3-2. Materials Required
Nomenclature
Type/Part No.
Appendix F Item No.
Lint-Free Cloth
8722-0088
7
Alcohol
TT-I-735A
4
Paint
MIL-C-46168 Color 383 IAW
FED-STD-595, CARC
21
Methyl Ethyl Ketone (MEK)
ASTM-D-740
14
Equivalent substitutes may be used for above items.
3.1.3 Cleaning.
WARNING
Use solvent in a well-ventilated area. Avoid breathing vapors. Keep away
from flame.
NOTE
Normally, the M93 MVS will not require cleaning of any internal parts because it
is sealed against dirt and moisture.
a. Clean M93 MVS units with a clean, lint-free cloth moistened with alcohol. Cleaning
materials and compounds are listed in Table 3-2.
b. Clean cable surfaces with a clean, lint-free cloth moistened with alcohol.
c. Remove adhesive and heatsink compounds from parts using MEK.
3.1.4 External Inspection
. If any discrepancies are discovered, refer to the applicable repair
and replacement procedures provided in the appropriate sections of this chapter.
a. Inspect all components for security of attachment.
b. Inspect that Mounting Bracket is properly secured to gun. Check for missing bolts
or physical damage.
c. Inspect Transceiver Radome for physical damage. Clean if necessary.
d. Inspect all cables for nicks, cracks, and broken wires.
e. Inspect that cables are not pinched or crimped.
3-4
Back to Top
