TM-9-1290-365-24-P
PALADIN MUZZLE VELOCITY SYSTEM M93 UPGRADED
TECHNICAL MANUAL; UNIT, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST
OCTOBER 2000
TM-9-1290-365-24-P - Page 53 of 334
ARMY TM 9-1290-365-24&P
3.1.5 Refinish of Painted Surfaces.
WARNING
CARC paint is a carcinogenic material and must be used carefully.
CAUTION
DO NOT PAINT TRANSCEIVER RADOME.
Repair Transceiver Assy painted surfaces in accordance with TM 43-0139 using forest green
color CARC IAW FED-STD-595.
3.1.6 Replacement of Identification Plates
. Replace damaged plates as follows:
a. Remove plate by peeling.
b. Be sure plate installation area is clean of old bonding residue. Refer to para. 3.1.3
for cleaning instructions.
c. Remove protective covering from back of plate and firmly press plate into place.
3.1.7 Cable Testing
. Cable assembly testing consists of performing continuity checks. Each
cable shall be tested for compliance with its individual wiring diagram. Refer to appropriate
sections in Chapter 3 for cable testing and repair procedures.
3.1.8 Troubleshooting
. Troubleshooting of the M93 MVS is limited to the interface between the
MVS and AFCS. Troubleshoot IAW Table 3-3.
3.1.9 Shipping Instructions for items not repairable at field level:
a. Fill out DA 2407 and/or DA 2404 to describe defects with item and where the items
need to be returned to. If serialized, include serial number of unit.
b. Address for Shipping:
Borish Manufacturing Corp.
4511 East Paris SE
Grand Rapids, MI 49512
DODAC: CMASD8
RIC: CCA
c. Send one copy of DA Form 2404 and 2407 to the above address and one copy to the
following address:
TACOM-RI
ATTN: AMSTA-LC-CFTC
Rock Island Arsenal
Rock Island, IL 61299-7630
Change 1
3-5
Back to Top
