TM-9-2320-209-10-4
2 1/2-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)
TECHNICAL MANUAL; MAINTENANCE; OPERATOR LEVEL
SEPTEMBER 1980
TM-9-2320-209-10-4 - Page 41 of 87
TM 9-2320-209-10-4
b. Removal.
FRAME 1
1. Using square end of wheel stud nut wrench (1), unscrew and take off six inner
wheel nuts (2).
CAUTION
Do not slide wheel assembly on threaded studs. Sliding
wheel assembly may damage threads.
NOTE
Nuts have left-hand threads on left wheel assembly and
right-hand threads on right wheel assembly. Studs and
nuts are stamped (L) left and (R) right.
2. Put fingers through vent holes (3) and grip wheel (4)
wheel, pull it toward
you, and take it off.
END OF TASK
2-29
Back to Top
