TM-9-2320-209-10-4

2 1/2-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; MAINTENANCE; OPERATOR LEVEL

SEPTEMBER 1980
TM-9-2320-209-10-4

  TM-9-2320-209-10-4 - Page 49 of 87

TM 9-2320-209-10-4
b.
Replacement.
FRAME 1
WARNING
Never use rivets, bolts, steel pins, or any other type metal
pin in place of shear pin (1).
Make sure you use the correct
part number aluminum shear pin only. Damage to the equip-
ment and injury to personnel can happen if wrong shear pin
is used.
1.
Spread a small amount of grease around a new shear pin (1).
2 .
Working under front left side, find universal joint (2).
3 .
Aline hole in yoke (3) with hole in winch drive shaft (4) and put in shear pin (1).
GO TO FRAME 2
2-37


Back to Top