TM-9-2320-209-10-4
2 1/2-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)
TECHNICAL MANUAL; MAINTENANCE; OPERATOR LEVEL
SEPTEMBER 1980
TM-9-2320-209-10-4 - Page 48 of 87
TM 9-2320-209-10-4
FRAME 2
1 .
Using hammer and drift punch, tap out shear pin (1).
2 .
If shear pin (1) has broken off, line up hole in yoke (2) with hole in winch drive
shaft
(3).
3 .
Using hammer and drift punch, tap out any remaining pieces of shear pin (1).
END OF TASK
2-36
Back to Top
