TM-9-2320-209-20-3-1

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 1 OF 4

MAY 1981

TM-9-2320-209-20-3-1 - Page 803 of 830

TM 9-2320-209-20-3-1

FRAME 2

1.

2.

3.

4.

Using brass punch and hammer, put seal assembly (1) into end of axle

housing (2) as shown.

Be very careful not

putting splined end

axle housing (2).

CAUTION

to damage seal assembly (1) when

of axle shaft assembly (3) into

Put axle shaft assembly (3) with thrust washers (4) through steering knuckle

housing (5) as shown.

Guide splined end (6) through axle housing (2) into splined differential side

gear inside of housing.

Slide spindle assembly (7) onto outer shaft of axle shaft assembly (3).

GO TO FRAME 3

11-15