TM-9-2320-209-20-3-1

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 1 OF 4

MAY 1981

TM-9-2320-209-20-3-1 - Page 806 of 830

TM 9-2320-209-20-3-1

Section III.

STEERING MECHANISM

11-6. STEERING KNUCKLE BOOT REMOVAL AND REPLACEMENT.

NOTE

This task is the same for the left and right side

of the truck.

TOOLS:

7/8-inch wrench

9/16-inch wrench (2)

Knife 11/32-inch wrench

Flat-tip screwdriver

SUPPLIES:

Kit (composed of steering knuckle boot and tube of cement)

Fine safety wire, MS-20995E

PERSONNEL: One

EQUIPMENT CONDITION:

Truck parked, engine off, handbrake set.

a.

Removal.

FRAME 1

1.

Using 9/16-inch wrenches, unscrew and take out screw (1) and nut (2).

Bracket (3) will now be free of boot guard (4).

GO TO FRAME 2

11-18