TM 9-2320-209-20-3-1
1.
Put boot
wrench,
NOTE
On left side of truck, two nuts hold top of boot guard
(1). On right side of truck, two screws (3) hold top
of boot guard. In this frame they are called fasteners.
guard (1) in place. Put lockwasher (2) on and using 7/8-inch
screw on and tighten two fasteners (3).
2.
Put lockwashers (4) on screws (5) and using 7/8-inch wrench, screw in and
tighten screws.
3.
Put screw (6) through bracket (7) and boot guard (1). Using 9/16-inch
wrenches, screw on and tighten nut (8).
END OF TASK
11-24