TM-9-2320-209-20-3-1

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 1 OF 4

MAY 1981

TM-9-2320-209-20-3-1 - Page 805 of 830

TM 9-2320-209-20-3-1

FRAME 4

1.

Put hydraulic brake line (1) in place on brake assembly (2) and aline holes.

2.

Put screw (3) and two washers (4) in place as shown. Using 3/4-inch wrench,

screw in and tighten screw.

NOTE

Follow-on Maintenance Action Required:

1.

Replace brake drum and hub. Refer to Part 2,

para 14-4.

2.

Jack up front of truck, take out supports, and lower

front of truck. Refer to para 11-3.

3.

Bleed brakes. Refer to Part 2, para 13-15 and 13-16.

4. Remove rear wheels chocks.

END OF TASK

11-17