TM 9-2320-209-20-3- 2
a .
Removal .
NOT E
Put container under hydraulic lines and fitting s
to catch draining hydraulic fluid. Cap all ope n
hoses, lines, and fittings to keep dirt fro m
getting into hydraulic systems .
Tag all lines so that they will be put back in the
same place .
Some hydraulic lines and hoses ma y
have plastic ties in place of clamps. If so, cu t
and take off all plastic ties .
(1) Hydraulic lines and clamps .
NOT E
Hydraulic line on left rear axle is used for thi s
typical procedure .
FRAME 1
1 .
Using 9/16-inch wrench , hold multiple connector (1). Using 7/16-inc h
combination box and open end wrench, unscrew and take out tube nut (2) .
GO TO FRAME 2
13-8 8