TM 9-2320-209-20-3- 2
(b) Multiple tee fittin g
NOT E
Multiple tee fitting on brake hydraulic line o n
left rear axle is used for this typical procedure .
1 .
Using 7/8-inch open end wrench, hold multiple tee fitting (1). Using 1/2-inc h
open end wrench, unscrew and take off adapter (2) .
2 .
Using 7/8-inch open end wrench, hold multiple tee fitting (1). Using 7/16 -
inch combination box and open end box wrench, unscrew and take off tw o
tube nuts (3) .
3 .
Using 9/16-inch open end wrench, hold self-locking nut (4). Using 9/16-inc h
open end wrench, unscrew and take out capscrew (5). Take off multiple te e
fitting (1) .
END OF TAS K
13-9 5