TM 9-2320-209-20-3- 2
FRAME 2
1 .
Using 5/8-inch combination box and open end box wrench, put in and hol d
tube nut (1) .
Using 15/16-inch open end wrench, screw on and tighte n
washer (2) and nut (3) .
2 .
Using 15/16-inch combination box and open end box wrench, hold tube nu t
(3). Using 7/16-inch combination box and open end box wrench, screw o n
and tighten tube nut (4) .
NOT E
Follow-on Maintenance Action Required :
Bleed hydraulic system .
Refer to para 13-15 and 13-16 .
END OF TAS K
13-10 1