TM-9-2320-209-20-3-3

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 3 OF 4

MAY 1981

TM-9-2320-209-20-3-3 - Page 452 of 548

TM 9-2320-209-20-3-3

b. Repair.

WARNING

1.

2.

3.

Eye shields must be worn when using grinder. Eye

injury can occur if eye shields are not used.

Using grinder, take off damaged connecting link (1) from chain assembly (2)

by grinding off two riveted ends (3) from connecting link pins (4).

Take

link from chain.

Put removable connecting link pins (5) into two ends of chain (2).

Put link

plate (6) onto connecting link pins.

Clip connector plate (7) over link plate (6) and onto link pins (5).

NOTE

Follow-on Maintenance Action Required:

1.

Replace horizontal leveling worm drive chain. Refer

to para 18-78.

2.

Replace rear winch drive chain. Refer to Part 4,

para 19-13.

3.

Replace reduction drive chain. Refer to Part 4,

para 19-17.

4.

Replace vertical leveling drive chain. Refer to

para 18-79.

END OF TASK

18-437