TM-9-2320-209-20-3-3

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 3 OF 4

MAY 1981

TM-9-2320-209-20-3-3 - Page 455 of 548

TM 9-2320-209-20-3-3

FRAME 2

1.

Lift up other end of drive shaft (1). Aline hole in

with those in companion flange (3).

2.

Put two screws (4) through holes in universal joint

flange (3).

3.

Screw on and hand tighten nuts (5) on screws (4).

4.

Using 3/4-inch open end wrench, hold screws (4).

wrench, tighten nuts (5 and 6).

END OF TASK

universal

yoke (2)

joint yoke (2)

and companion

Using 3/4-inch box

18-440