TM-9-2320-209-20-3-3

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 3 OF 4

MAY 1981

TM-9-2320-209-20-3-3 - Page 453 of 548

TM 9-2320-209-20-3-3

18-82. EARTH BORING

REPLACEMENT .

TOOLS :

3/4-inch

3/4-inch

SUPPLIES :

None

PERSONNEL :

One

MACHINE DRIVE SHAFT ASSEMBLY REMOVAL AND

open end wrench

box wrench

EQUIPMENT CONDITION:

Truck parked, engine off, handbrake set.

a.

Removal.

1.

Using 3/4-inch open end wrench, hold two nuts (1). Using 3/4-inch box

wrench, unscrew and take off two nuts and screws (2).

2.

Let end of drive shaft (3) down slowly.

3.

Using 3/4-inch open end wrench, hold four nuts (4) . Using 3/4-inch

wrench, unscrew and take off four nuts and screws ( 5).

4.

Take out drive shaft (3) .

END OF TASK

18-438