TM-9-2320-209-20-3-4
2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)
TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 4 OF 4
MAY 1981
TM-9-2320-209-20-3-4 - Page 44 of 410
TM 9-2320-209-20-3-4
19-8. WINCH AND POWER TAKEOFF SPROCKETS REMOVAL, REPAIR, AND RE-
PLACEMENT (TRUCK M756A2).
TOOLS:
3/4-inch drive ratchet
Short extension
1 1/2-inch socket
Medium ballpeen hammer
1/4-inch punch
Needle nose pliers
Snapring pliers
6-inch puller
5-foot prybar
Wood block, 2 x 4 x 15 1/2 inches
Wood block, 2 x 4 x 3 inches
SUPPLIES: Solvent, dry cleaning, type II (SD-2), Fed. Spec P-D-680
Cotter pin
PERSONNEL: Two
EQUIPMENT CONDITION:
Truck parked, engine off, handbrake set.
a.
Preliminary Procedure. Remove winch drive chain. Refer to para 19-13.
19-31
Back to Top
