TM-9-2320-209-20-3-4
2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)
TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 4 OF 4
MAY 1981
TM-9-2320-209-20-3-4 - Page 51 of 410
TM 9-2320-209-20-3-4
Dry cleaning
near an open
nearby when
WARNING
solvent is flammable. Do not use
flame.
Keep a fire extinguisher
solvent is used. Use only in well-
ventilated places. Failure to do this may result
in injury to personnel or damage to equipment.
d.
Cleaning. Clean sprockets in solvent.
e.
Inspection and Repair. Check that sprockets have no wear, cracks, breaks,
chips or broken teeth. If sprockets are damaged, get new ones in their place.
f.
Assembly of Winch Sprocket Assembly.
FRAME 1
1.
Put hub (1) in sprocket (2).
2.
Put washer (3) in place.
3.
Using snapring pliers, put on snapring (4).
END OF TASK
TA 08091 7
19-38
Back to Top
