TM-9-2320-209-20-3-4
2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)
TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 4 OF 4
MAY 1981
TM-9-2320-209-20-3-4 - Page 55 of 410
TM 9-2320-209-20-3-4
(2) Winch sprocket assembly.
FRAME 1
1.
2.
3.
4.
Put hub (1) and sprocket (2) on winch shaft (3) and line up hole in winch
shaft with holes in hub and sprocket.
Using hammer and punch, drive pin (4) into winch shaft (3) and hub (1). Pin
must be only in hub and shaft so sprocket will turn.
Turn sprocket (2) one-quarter turn and put shear pin (5) through holes in
sprocket and hub (1).
Using needle nose pliers, put cotter pin (6) through hole in shear pin (5) and
bend open ends of cotter
Follow-on
pin.
NOTE
Maintenance Action Required:
Replace winch drive chain. Refer to para 19-13.
END OF TASK
TA 08091 8
19-42
Back to Top
