TM-9-2320-209-20-3-4

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 4 OF 4

MAY 1981

  TM-9-2320-209-20-3-4 - Page 52 of 410

TM 9-2320-209-20-3-4
g.
Replacement.
(1) Power takeoff sprocket.
FRAME 1
1.
Put sprocket (1) in place.
2.
Hold 2 x 4 x 15 1/2-inch wood block (2) between teeth of sprocket (1) and
truck frame. Using 3/4-inch drive ratchet, short extension, and 1 1/2-inch
socket, screw on and tighten shaft nut (3).
3.
Using needle nose pliers, put cotter pin (4) through hole in shaft nut (3) and
bend open ends of cotter pin.
GO TO FRAME 2
TA 080920
19-39


Back to Top