TM-9-2320-209-20-3-4
2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)
TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 4 OF 4
MAY 1981
TM-9-2320-209-20-3-4 - Page 49 of 410
TM 9-2320-209-20-3-4
FRAME 3
1.
2.
3.
END
Working under truck, using needle nose pliers, pull out cotter pin (1) from
shaft nut (2).
Throw away cotter pin.
Hold 2 x 4 x 15 1/2-inch wood block (3) between teeth of sprocket (4) and
truck frame.
Using 3/4-inch ratchet, short extension, and 1 1/2-inch socket,
unscrew and take off shaft nut (2).
Using puller, take off sprocket (4).
NOTE
Do not lose key in sprocket shaft.
OF TASK
TA 08091 9
19-36
Back to Top
