TM-9-2320-209-34-2-2
2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)
TECHNICAL MANUAL; MAINTENANCE; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 3
MAY 1981
TM-9-2320-209-34-2-2 - Page 530 of 899
TM 9-2320-209-34-2-2
1.
Put on lockwasher (1).
2.
Using spanner wrench, put on bearing adjusting nut (2).
3.
Bend tabs on lockwasher (1) against two bearing adjusting nuts (2 and 3).
4.
Put on sleeve spacer (4).
NOTE
Shims (5) must be same thickness as noted in removal.
5.
Put on shims (5).
6.
Pack lower tapered roller bearing (6) with grease. Put on roller bearing.
END OF TASK
17-513
Back to Top
