TM-9-2320-209-34-2-2
2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)
TECHNICAL MANUAL; MAINTENANCE; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 3
MAY 1981
TM-9-2320-209-34-2-2 - Page 534 of 899
TM 9-2320-209-34-2-2
1.
Working through inspection hole (1), check that front edge and intermediate
case second reduction drive pinion (2) is alined with front edge of boring
case rack drive gear (3) as shown.
2.
If gears are not alined, note position of gears.
IF GEARS ARE NOT ALINED, GO TO FRAME 5.
IF GEARS ARE ALINED, GO TO FRAME 6
17-517
Back to Top
