TM-9-2320-209-34-2-2
2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)
TECHNICAL MANUAL; MAINTENANCE; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 3
MAY 1981
TM-9-2320-209-34-2-2 - Page 538 of 899
TM 9-2320-209-34-2-2
1.
Working through inspection hole (1), check that front edge of intermediate
case second reduction
feed
pinion (2) is alined with front edge of rack feed
idler gear (3) as shown.
2.
If gears are not alined, note position of gears.
IF GEARS ARE NOT ALINED, GO TO FRAME 9.
IF GEARS ARE ALINED, GO TO FRAME 10
17-521
Back to Top
