TM-9-2320-209-34-2-2

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; MAINTENANCE; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 3

MAY 1981

TM-9-2320-209-34-2-2 - Page 541 of 899

TM 9-2320-209-34-2-2

FRAME 11

1.

Remove and disassemble boring case gear assembly. Refer to para 17-46b

and 17-46c.

2.

If reading in step 4, frame 10 is less than .011 inch, do the following:

a.

Add .011-inch thickness to lower rack carrier bearing shim set (1).

b. Take out .011-inch thickness from upper rack carrier bearing shim

set (2).

c. Add .011-inch thickness to rack drive gear shim set (3).

3.

If reading in step 4, frame 10 is more than .034 inch, do the following:

a. Take out .020-inch thickness from lower rack carrier bearing shim set (2),

b.

Add .020-inch thickness to upper rack carrier bearing

4.

Assemble and replace boring case gear assembly. Refer to

17-46h.

5.

Do frame 4 again.

GO TO FRAME 12

shim set (2).

para 17-46g and

17-524