TM-9-2320-209-34-2-2

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; MAINTENANCE; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 3

MAY 1981

TM-9-2320-209-34-2-2 - Page 547 of 899

TM 9-2320-209-34-2-2

17-47. INTERMEDIATE CASE AND GEAR ASSEMBLY REMOVAL, REPAIR,

REPLACEMENT AND ADJUSTMENT (TRUCK M764).

TOOLS:

Spanner wrench, pn CT685

SUPPLIES: Cap cover gasket

Second reduction feed pinion bearing shim set

First reduction drive and feed gear shim set

First reduction feed gear shim set

Second reduction drive pinion bearing shim set

Artillery and automotive grease (GAA), MIL-G-10924

Lubricating oil, ICE, OE/HDO

Rubber bands (2)

Solvent, dry cleaning, type II

Compressed air source, 30 psi

PERSONNEL: T

WO

10, MIL-L-2104

(SD-2), Fed. Spec P-D-680

max

EQUIPMENT CONDITION:

Truck parked, engine off, handbrake set.

a.

Preliminary Procedures.

(1) Drain lubricant from intermediate gear case. Refer to

LO 9-2320-209-12/1.

(2) Remove integral derrick assembly and auger rack bar. Refer to

para 17-56.

(3) Remove boring case and gear assembly. Refer to para 17-46.

(4) Remove horizontal leveling worm. Refer to para 17-49.

(5) Remove power leveler. Refer to para 17-53.

(6) Remove vertical leveling worm. Refer to para 17-50.

17-530