TM-9-2320-209-34-2-3

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; MAINTENANCE; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 3 OF 3

MAY 1981

TM-9-2320-209-34-2-3 - Page 287 of 592

TM 9-2320-209-34-2-3

c.

Replacement.

FRAME 1

1.

Working under truck, put on gasket (1).

Lift power takeoff (2) on transmission

(3).

2.

Put on six nuts (4) and washers (5). Tighten nuts to 30 to 40 pound-feet.

NOTE

Follow-on Maintenance Action Required:

1.

If working on truck M342A2, replace hydraulic

hoist pump propeller shaft and yoke. Refer to

TM 9-2320-209-20.

2.

If working on truck with front winch, replace

front winch propeller shaft and yoke. Refer to

Transmission Power Takeoff Shaft Linkage Removal

and Replacement,

TM 9-2320-209-20.

3.

Fill transmission. Refer to LO 9-2320-209-12/1.

4.

If working on truck with front winch, replace front

winch propeller shaft. Refer to TM 9-2320-209-20.

5.

If working on truck M342A2, replace hydraulic

hoist pump propeller shaft. Refer to

TM 9-2320-209-20.

END OF TASK

18-276