TM-9-2320-209-34-2-3

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; MAINTENANCE; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 3 OF 3

MAY 1981

TM-9-2320-209-34-2-3 - Page 280 of 592

TM 9-2320-209-34-2-3

b.

Replacement.

FRAME 1

Soldier A

1. Using hoist, raise power divider (1) into position with sprocket (2)

facing toward front of truck.

NOTE

If chain (3) has been taken off, put on chain and master

link after step 3.

Soldier B

2. Working from above power divider (1), lower chain (3) toward

power divider (1) and hold it.

Soldier A

3. Put chain (3) on sprocket (2). Align mounting holes on power

divider (1) with mounting holes on

4.

Put in four capscrews and washers

105 to 115 pound-feet.

GO TO FRAME 2

mounting b-rackets (4 and 5).

(6). Tighten cap screws to

18-269