TM-9-2320-209-34-2-3
2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)
TECHNICAL MANUAL; MAINTENANCE; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 3 OF 3
MAY 1981
TM-9-2320-209-34-2-3 - Page 274 of 592
TM 9-2320-209-34-2-3
FRAME 14
1.
Check that shafts (1 and 2) have 0.005 inch end play. If needed, take off bearing
caps (3 and 4) and add or take off shims (5 and 6) until end play is 0.005 inch.
2.
Put cotter pin (7) through nut (8) and shaft (1).
3.
Put cotter pin (9) through nut (10) and shaft (2).
GO TO FRAME 15
18-263
Back to Top
