TM-9-2320-209-34-2-3

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; MAINTENANCE; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 3 OF 3

MAY 1981

TM-9-2320-209-34-2-3 - Page 272 of 592

TM 9-2320-209-34-2-3

FRAME 12

1.

Put outer race and roller portion of bearing (1) in end of gear (2).

2.

Move shifter fork (3) to catch detent in third slot from front of shaft (4).

3.

While holding gear (5) in shifter fork (3) with one hand, put shaft assembly (6)

through front of housing (7).

4.

Mesh splines of gear (5) with splines of shaft assembly (6). Push shaft assembly

into housing (7) until bearing inner race (8) is seated with bearing outer race (1)

in shaft (2).

GO TO FRAME 13

18-261