TM-9-2320-209-34-2-3

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; MAINTENANCE; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 3 OF 3

MAY 1981

TM-9-2320-209-34-2-3 - Page 262 of 592

TM 9-2320-209-34-2-3

FRAME 2

1.

Put bearing (1) on shaft (2) with bearing against gear (3).

2.

Put bearing cap (4) on housing (5). Put in four capscrews and washers (6).

NOTE

Lip of seal (7) must face in toward housing (5) and casing

must be flush with outside of bearing cap (8).

3.

If oil seal (7) was taken out, put in new seal.

4.

Put bearing cap (8) with seal (7) and shims (9) as noted on housing (5). Put in four

capscrews and washers (10).

GO TO FRAME 3

18-251