TM-9-2320-209-34-2-3

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; MAINTENANCE; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 3 OF 3

MAY 1981

TM-9-2320-209-34-2-3 - Page 270 of 592

TM 9-2320-209-34-2-3

FRAME 10

1.

Put shaft assembly (1) through opening in housing (2) until bearing (3) is seated

against inside shoulder of housing.

2.

If oil seal (4) was taken out, press new seal into bearing cap (5). Be sure seal lip

faces toward housing side of cap.

3.

Put shims (6) on bearing cap (5) as noted.

4.

Put bearing cap (5) with oil seal (4) and shims (6) on housing (2). Put in four

capscrews (7) and washers (8).

5.

Put sleeve (9) on shaft assembly (1) through oil seal (4) until it touches bearing (10).

GO TO FRAME 11

18-259