TM-9-2320-209-34-2-3
2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)
TECHNICAL MANUAL; MAINTENANCE; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 3 OF 3
MAY 1981
TM-9-2320-209-34-2-3 - Page 275 of 592
TM 9-2320-209-34-2-3
FRAME 15
1.
Move shifter rod (1) until detent (2) in shifter fork (3) goes into neutral position slot
(4) in shifter shaft (5).
2.
Turn input shaft (6). Rear output shaft (7) should not turn.
3.
Turn sliding gear (8). Sliding gear should turn without meshing with any other gear.
4.
If sliding gear (8) meshes with reverse idler gear (9), move shifter shaft (5) with
screwdriver until sliding gear is free of reverse idler gear.
GO TO FRAME 16
18-264
Back to Top
