TM-9-2320-209-34-2-3

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; MAINTENANCE; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 3 OF 3

MAY 1981

TM-9-2320-209-34-2-3 - Page 264 of 592

TM 9-2320-209-34-2-3

FRAME 4

1.

If inner faces of bearings (1 and 2) were taken off shaft bearing sleeve (3), press in

new inner races.

Place inner bearing spacer (4) between two inner races.

NOTE

Make sure that each inner race of bearings (1 and 2) is the

same distance from end of bearing sleeve (3).

2.

Put gear (5) over bearing spacer (4).

3.

Put outer bearing spacer (6) and outer race and roller portion of bearings (1 and 2)

in gear (5).

GO TO FRAME 5

18-253