TM-9-2320-209-34-2-3

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; MAINTENANCE; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 3 OF 3

MAY 1981

TM-9-2320-209-34-2-3 - Page 259 of 592

TM 9-2320-209-34-2-3

FRAME 4

1.

Put a coat of clean oil on bearings (1 through 7), Turn each bearing slowly

by hand.

Each bearing must turn smoothly and freely without binding. If

bearings are damaged, get new ones.

2.

Check that ball bearings (1 through 6) and two roller bearings (7) have no

pitting, wear or any other damage.

If bearings are worn or damaged, get

new ones.

3.

Check that bearing cages have no cracks or other damage. If bearing cages

are worn or damaged, get new bearings.

GO TO FRAME 5

18-248