TM-9-2320-209-34-2-3

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; MAINTENANCE; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 3 OF 3

MAY 1981

TM-9-2320-209-34-2-3 - Page 342 of 592

TM 9-2320-209-34-2-3

FRAME 5

1.

Take restrictive electrical lead (1) out of clip (2).

2.

Hold fuel outlet (3) of fuel control valve (4) over overflow container (5).

3.

Be sure HI-LO switch (6) is in LO position. Flip control switch (7) to RUN

position.

Fuel pump should be pumping.

4.

Flip HI-LO switch (6) to HI. Let fuel flow into overflow container (5) for a

few seconds.

5.

Let fuel flow into graduate (8) for exactly one minute. Flip HI-LO switch (6)

to LO. Flip control switch (7) to OFF position.

6.

Place graduate (8) on a level surface. Read level of fuel (9) as shown. Level

of fuel should be as in table for type of fuel used.

FUEL TYPE

Diesel Fuel

Combat

DFA

DF1

DF2

Gasoline

Flow Rate

(cc/mm)

6 to 8

6.5 to 8.5

6.5 to 8.5 7 to 9

7.

If fuel flow is not within range of table, get a new fuel control valve (4).

GO TO FRAME 6

21-7