TM-9-2320-209-34-2-3

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; MAINTENANCE; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 3 OF 3

MAY 1981

TM-9-2320-209-34-2-3 - Page 343 of 592

TM 9-2320-209-34-2-3

FRAME 6

1.

Take off electrical lead (1) from fuel control valve body (2) and from

pin A (3) of wiring harness connector (4).

2.

Take off electrical lead (5) from fuel control valve leads (6) and from pin B

(7) of wiring harness connector (4).

3.

Take off fuel supply line (8) from fuel inlet fitting (9).

NOTE

If these tests on fuel control valve were done as part

of cleaning, inspection, and repair, skip step 4, go to

para 21-6d (5), frame 2.

4.

Put fuel control valve (2) on heater (10). Refer to para 21-6e, frame 8,

frame 9, and frame 12.

END OF TASK

21-8