TM-9-2320-260-20

TRUCK, 5-TON, 6X6, M809 SERIES (DIESEL)

TECHNICAL MANUAL; UNIT MAINTENANCE

APRIL 1995

TM-9-2320-260-20 - Page 1219 of 1337

TM 9-2320-260-20

14-53. CONVOY WARNING LIGHT MOUNT (M817) REPLACEMENT

THIS TASK COVERS:

a.

Removal

b. Installation

INITIAL SETUP

APPLICABLE MODELS

REFERENCES (TM)

M817

TM 9-2320-260-10

MATERIALS/PARTS

TM 9-2320-260-20P

Four locknuts

EQUIPMENT CONDITION

•

Parking brake set (TM 9-2320-260-10).

• Convoy warning light removed (para. 14-58).

1. Disconnect cable (8) from harness (7).

2. Pull cable (8) from mounting bracket (11), support tube (2), and mounting plate (1).

3. Loosen wing screw (3) and remove support tube (2) from mounting bracket (11).

4. Remove mounting plate (1) from support tube (2).

5.

Remove four locknuts (5), screws (10), washers (4) and (9), and mounting bracket (11) from

cab protector (6). Discard locknuts (5).

1.

Install mounting bracket (11) on cab protector (6) with four washers (4) and (9), screws (10),

and new locknuts (5).

2.

Install mounting plate (1) on support tube (2).

3. Insert cable (8) through mounting plate (1), support tube (2), and mounting bracket (11).

4. Install support tube (2) on mounting bracket (11) with wing screw (3).

5.

Connect cable (8) to harness (7).

14-102