TM-9-2320-260-20

TRUCK, 5-TON, 6X6, M809 SERIES (DIESEL)

TECHNICAL MANUAL; UNIT MAINTENANCE

APRIL 1995

TM-9-2320-260-20 - Page 517 of 1337

TM 9-2320-260-20

4-42. FLOODLIGHT LAMP REPLACEMENT

THIS TASK COVERS:

a. Lamp Removal

b. Lamp Installation

INITIAL SETUP

APPLICABLE MODELS

REFERENCES (TM]

M816, M819

TM 9-2320-260-10

MATERIALS/PARTS

TM 9-2320-260-20P

Two screw-assembled lockwashers

EQUIPMENT CONDITION

Three O-rings

●

Parking brake set (TM 9-2320-260-10).

•Battery ground cable disconnected (para. 4-48).

1. Remove three screws (1), retaining ring (2), and three O-rings (3) from housing (7). Discard

o-rings (3).

NOTE

Tag all wires for installation.

2. Remove four springs (10) and lamp (4) from retaining ring (2).

3. Remove screw-assembled lockwashers (6) and (8) and wires (5) and (9) from lamp (4). Discard

screw-assembled lockwashers (6) and (8).

1. Install lamp (4) on retaining ring (2) with four springs (10).

2. Install wires (5) and (9) on lamp (4) with new screw-assembled lockwashers (6) and (8).

3. Install three new O-rings (3) and retaining ring (2) on housing (7) with three screws (1).

FOLLOW-ON TASKS: • Connect battery ground cable (para. 4-48).

• Check operation of floodlamp (TM 9-2320-260-10).

4-76