TM-9-2320-260-20

TRUCK, 5-TON, 6X6, M809 SERIES (DIESEL)

TECHNICAL MANUAL; UNIT MAINTENANCE

APRIL 1995

TM-9-2320-260-20 - Page 521 of 1337

TM 9-2320-260-20

I

4-44. SIDE MARKER AND CLEARANCE LIGHT REPLACEMENT

THIS TASK COVERS:

a. Removal

b. Installation

INITIAL SETUP

APPLICABLE MODELS

REFERENCES (TM)

M820, M820A1, M820A2, M821

TM 9-2320-260-10

MATERIALS/PARTS

TM 9-2320-260-20P

Four lockwashers (M821)

EQUIPMENT CONDITION

Two clips

• Parking brake set (TM 9-2320-260-10).

Gasket

• Battery ground cable disconnected (para. 4-48).

NOTE

Side marker and clearance lights are replaced

This procedure covers the clearance lights.

1. Remove two screws (5) and lens frame (4) from base (7).

basically the same.

2. Remove two clips (3) and lens (6) from lens frame (4). Discard clips (3).

3. Remove lamp (2) from base (7).

4. Remove four screws (1), base (7), and gasket (8) from van body (10). Discard gasket (8).

5. Disconnect lead (9) from wire (11).

b. Installation

1. Install lead (9) through new gasket (8) and connect to wire (11).

2. Install new gasket (8) and base (7) on body (10) with four screws (1).

3. Install lamp (2) in base (7).

4. Install lens (6) in lens frame (4) with two new clips (3).

5. Install lens frame (4) on base (7) with two screws (5).

4-80