TM-9-2320-260-34-1
TRUCK, 5-TON, 6X6, M809 SERIES (DIESEL)
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE; VOLUME 1 OF 2
JULY 1994
TM-9-2320-260-34-1 - Page 529 of 657
TM 9-2320-260-34-1
9-4. TRANSFER REPAIR (Contd)
Table 9-3. Shaft Assemblies with Fitted and Mated Parts Wear Limits.
a
ITEM
WEAR LIMITS/TOLERANCES
NO.
ITEM/POINT OF MEASUREMENT
INCHES
MILLIMETERS
1
Bearings
Input shaft, front, double ball bearing
Inner diameter
2.1648-2.1654
54.986-55.001
Outer diameter
4.7238-4.7244
119.985-120.00
2
Sprag ring, input shaft, bearing, front - thickness
0.196-0.200
4.98-5.08
3
Spacer, input shaft, gear bearings (2) – thickness
1.449-1.453
36.80-36.91
4
Input shaft (3 places):
Rear bearing
1.9684-1.9689
49.997-50.010
b
High gear
2.1651-2.1656
54.994-55.006
c
Low gear and front bearing
2.1651-2.1656
54.994-55.006
5
Input low-speed gear – inner diameter
3.9361-3.9371
99.977-100.002
6
Input shaft, gears, ball bearing
Inner diameter
2.1648-2.1654
54.986-55.001
Outer diameter
3.9364-3.9370
99.985-100.00
7
Input high-speed gear - inner diameter
3.9361-3.9371
99.977-100.002
8
Washer, input shaft, bearing, rear - thickness
0.250-0.255
6.35-6.48
9
Input shaft, rear, ball bearing
Inner diameter
1.9630-1.9685
49.860-50.000
Outer diameter
4.3301-4.3307
109.985-110.000
9-29
Back to Top
