I
15-90. ELECTRICAL BOX REPLACEMENT
THIS TASK COVERS:
a. Removal
b. Installation
INITIAL SETUP
APPLICABLE MODELS
REFERENCES (TM)
M820, M820A1, M820A2
TM 9-2320-260-10
TM 9-2320-260-20
TOOLS
TM 9-2320-260-34P-2
General mechanic’s tool kit
(Appendix B, Item 1)
EQUIPMENT CONDITION
●
Battery ground cable disconnected
(TM 9-2320-260-20).
●
Entrance receptacle removed (para. 15-81).
1. Remove six screws (1) and bracket (2) from electrical box (7) and load center (3).
2. Remove electrical box (7) from end panel (4).
3. Remove grommet (8) from electrical box (7).
4. Remove screw (5) and plate (6) from electrical box (7).
1. Install plate (6) on electrical box (7) with screw (5).
2. Install grommet (8) on electrical box (7).
3. Position electrical box (7) on end panel (4) and install
center (3) with six screws (1).
bracket (2) on electrical box (7) and load
FOLLOW-ON TASKS:
●
Install entrance receptacle (para. 15-81).
●
Connect battery ground cable (TM 9-2320-260-20).
15-332
TM 9-2320-260-34-2